Australian Standard As 5601 Gas Installations Gauteng

AS/NZS 5601.1:2013 Gas installations - General installations

AS/NZS 5601.1:2013 Gas installations – Part 1 General installations and AS/NZS 5601.2:2013 Gas installations – Part 2: LP Gas installations in caravans and boats for non-propulsive purposes replace the 2010 documents. However, the 2010 standards continue to be the ones referenced in the Gas (Safety and Measurement) Regulations 2010 until. Standards New Zealand, Standards Australia Information type New Zealand Standard Format PDF. Cited By This resource is cited by 5 documents (show Citations) Cites This resource cites 71 documents (show Citations). AS/NZS 5601.1:2013 Gas installations - General installations This document is CITED BY: G10/AS1 (First Edition, Amendment 8).

Description

This Standard provides the mandatory requirements and means of compliance for the design, installation and commissioning of gas installations associated with the use or intended use of fuel gases such as natural gas, LP Gas, or biogas.

Gas installations must be undertaken only by persons authorised under the Plumbers, Gasfitters and Drainlayers Act 2006.

Scope

Section 1 of this Standard details the scope and general aspects of a gas installation that contribute to its safety.

Section 2 outlines performance-based design and other essential requirements that must be met to ensure the safety of gas installations.

Sections 3 to 6 specify the means of compliance for installations within the limitations of section 2.

View on Information Provider website

AS/NZS 5601.1:2013 Gas installations - General installations

This document is CITED BY:

• G10/AS1 (First Edition, Amendment 8)

  AS/NZS 5601.1:2013 is cited by Acceptable Solution G10/AS1: Piped Services from 01/01/2017

• G11/AS1 (First Edition, Amendment 6)

  AS/NZS 5601.1:2013 is cited by Acceptable Solution G11/AS1: Gas as an Energy Source from 14/02/2014

• G4/AS1 (Third Edition, Amendment 4)

  AS/NZS 5601.1:2013 is cited by Acceptable Solution G4/AS1: Ventilation from 01/01/2017

• G4/AS1 (Fourth Edition)

  AS/NZS 5601.1:2013 is cited by Acceptable Solution G4/AS1: Ventilation from 01/01/2017

• G10/VM1 (First Edition, Amendment 8)

  AS/NZS 5601.1:2013 is cited by Verification Method G10/VM1: Piped Services from 01/01/2017

AS/NZS 5601.1:2013 Gas installations - General installations

Description

This Standard provides the mandatory requirements and means of compliance for the design, installation and commissioning of gas installations associated with the use or intended use of fuel gases such as natural gas, LP Gas, or biogas.

Gas installations must be undertaken only by persons authorised under the Plumbers, Gasfitters and Drainlayers Act 2006.

View on Information Provider website

AS/NZS 5601.1:2013 Gas installations - General installations

Description

This Standard provides the mandatory requirements and means of compliance for the design, installation and commissioning of gas installations associated with the use or intended use of fuel gases such as natural gas, LP Gas, or biogas.

Gas installations must be undertaken only by persons authorised under the Plumbers, Gasfitters and Drainlayers Act 2006.

View on Information Provider website

AS/NZS 5601.1:2013 Gas installations - General installations

This document CITES:

New Zealand Standards

• AS/NZS 1167.1:2005

  AS/NZS 5601.1:2013 cites AS/NZS 1167.1:2005 Welding and brazing - Filler metals - Filler metal for brazing and braze welding

• AS/NZS 1260:2009

  AS/NZS 5601.1:2013 cites AS/NZS 1260:2009 PVC-U Pipes and fittings for drain, waste and vent applications

• AS/NZS 1477:2006

  AS/NZS 5601.1:2013 cites AS/NZS 1477:2006 PVC pipes and fittings for pressure applications

• AS/NZS 1518:2002

  AS/NZS 5601.1:2013 cites AS/NZS 1518:2002 (R2016) External extruded high-density-polyethylene coating system for pipes

• AS/NZS 1530.3:1999

  AS/NZS 5601.1:2013 cites AS/NZS 1530.3:1999 (R2016) Methods for fire tests on building materials, components and structures - Simultaneous determination of ignitability, flame propagation, heat release and smoke release

• AS/NZS 1596:2008

  AS/NZS 5601.1:2013 cites AS/NZS 1596:2008 The storage and handling of LP Gas

• AS/NZS 1734:1997

  AS/NZS 5601.1:2013 cites AS/NZS 1734:1997 Aluminium and aluminium alloys - Flat sheet, coiled sheet and plate

• AS/NZS 1869:2012

  AS/NZS 5601.1:2013 cites AS/NZS 1869:2012 Hose and hose assemblies for liquefied petroleum gases (LP Gas), natural gas and town gas

• AS/NZS 2208:1996

  AS/NZS 5601.1:2013 cites AS/NZS 2208:1996 Safety glazing materials in buildings

• AS/NZS 2492:2007

  AS/NZS 5601.1:2013 cites AS/NZS 2492:2007 Cross-linked polyethylene (PE-X) pipes for pressure applications

• AS/NZS 2537.5:2011

  AS/NZS 5601.1:2013 cites AS/NZS 2537.5:2011 Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications - Part 5: Plastics pipes and fittings - Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels - Metric..

• AS/NZS 2648.1:1995

  AS/NZS 5601.1:2013 cites AS/NZS 2648.1:1995 Underground marking tape - Non-detectable tape

• AS/NZS 2918:2001

  AS/NZS 5601.1:2013 cites AS/NZS 2918:2001 Domestic solid fuel burning appliances - Installation

• AS/NZS 4129:2008

  AS/NZS 5601.1:2013 cites AS/NZS 4129:2008 Fittings for polyethylene (PE) pipes for pressure applications

• AS/NZS 4130:2009

  AS/NZS 5601.1:2013 cites AS/NZS 4130:2009 Polyethylene (PE) pipes for pressure applications

• AS/NZS 4645.1:2008

  AS/NZS 5601.1:2013 cites AS/NZS 4645.1:2008 Gas distribution networks - Part 1: Network management

• AS/NZS 4645.2:2008

  AS/NZS 5601.1:2013 cites AS/NZS 4645.2:2008 Gas distribution networks - Part 2: Steel pipe systems

• AS/NZS 4645.3:2008

  AS/NZS 5601.1:2013 cites AS/NZS 4645.3:2008 Gas distribution networks - Part 3: Plastics pipe systems

• AS/NZS 5263.1.1:2016

  AS/NZS 5601.1:2013 cites AS/NZS 5263.1.1:2016 Gas appliances - Part 1.1: Domestic gas cooking appliances

• AS/NZS 5263.1.3:2016 Gas appliances - Part 1.3: Gas space heating appliances

  AS/NZS 5601.1:2013 cites AS/NZS 5263.1.3:2016 Gas appliances - Part 1.3: Gas space heating appliances

  Where transpose of 'Spain' available (not all our notes can be transposed) & prior to print. Please check 'notes' icon for transpose options. Chick corea spain transcription pdf writer free.

• AS/NZS 60079.10.1:2009

  AS/NZS 5601.1:2013 cites AS/NZS 60079.10.1:2009 Explosive atmospheres - Part 10.1: Classification of areas - Explosive gas atmospheres

• NZS 4219:2009

  AS/NZS 5601.1:2013 cites NZS 4219:2009 Seismic performance of engineering systems in buildings

• NZS/AS 1530.1:1994 (R2016)

  AS/NZS 5601.1:2013 cites NZS/AS 1530.1:1994 (R2016) Methods for fire tests on building materials, components and structures - Part 1: Combustibility test for materials

Australian Standards

• AS 1668.2-2012

  AS/NZS 5601.1:2013 cites AS 1668.2-2012 The use of ventilation and airconditioning in buildings - Part 2: Mechanical ventilation in buildings

• AS 4551-2008

  AS/NZS 5601.1:2013 cites AS 4551-2008 Domestic gas cooking appliances

• AS 1074-1989

  AS/NZS 5601.1:2013 cites AS 1074-1989 (R2018) Steel tubes and tubulars for ordinary service

• AS 1210-2010

  AS/NZS 5601.1:2013 cites AS 1210-2010 Pressure vessels Xforce keygen adobe cc 2017 download.

• AS 1345-1995

  AS/NZS 5601.1:2013 cites AS 1345-1995 (R2018) Identification of the contents of pipes, conduits and ducts

• AS 1357.1-2009

  AS/NZS 5601.1:2013 cites AS 1357.1-2009 Valves primarily for use in heated water systems - Part 1: Protection valves

• AS 1397-2011

  AS/NZS 5601.1:2013 cites AS 1397-2011 Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium

• AS 1464.1-1984 and AS 1464.2-1984

  AS/NZS 5601.1:2013 cites AS 1464.1-1984 and AS 1464.2-1984 Plastics pipes and fittings for gas reticulation - Unplasticized PVC (UPVC) - Part 1: Pipes - Part 2: Fittings

• AS 1572-1998

  AS/NZS 5601.1:2013 cites AS 1572-1998 (R2018) Copper and copper alloys - Seamless tubes for engineering purposes

• AS 2129-2000

  AS/NZS 5601.1:2013 cites AS 2129-2000 (R2016) Flanges for pipes valves and fittings

• AS 2738-2000

  AS/NZS 5601.1:2013 cites AS 2738-2000 (R2018) Copper and copper alloys - Compositions and designations of refinery products, wrought products, ingots and castings

• AS 2944.1-2007

  AS/NZS 5601.1:2013 cites AS 2944.1-2007 Plastics pipes and fittings for gas reticulation - Part 1: Polyamide pipes

• AS 2944.2-2007

  AS/NZS 5601.1:2013 cites AS 2944.2-2007 Plastics pipes and fittings for gas reticulation - Part 2: Polyamide fittings

• AS 3688-2005

  AS/NZS 5601.1:2013 cites AS 3688-2005 Water supply - Metallic fittings and end connectors

• AS 3814-2009

  AS/NZS 5601.1:2013 cites AS 3814-2009 Industrial and commercial gas-fired appliances

• AS 4041-2006

  AS/NZS 5601.1:2013 cites AS 4041-2006 (R2016) Pressure piping

• AS 4176.8-2010

  AS/NZS 5601.1:2013 cites AS 4176.8-2010 Multilayer pipes for pressure applications - Part 8: Multilayer pipe systems for consumer gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) - Specifications for systems (ISO 17484-1:2006, MOD)

• AS 4553-2008

  AS/NZS 5601.1:2013 cites AS 4553-2008 Gas space heating appliances

• AS 4566-2005

  AS/NZS 5601.1:2013 cites AS 4566-2005 (R2017) Flue cowls - Gas appliances

• AS 4567-2005

  AS/NZS 5601.1:2013 cites AS 4567-2005 (R2017) Twin wall metal flues - Gas appliances

• AS 4617-2004

  AS/NZS 5601.1:2013 cites AS 4617-2004 Manual shut off gas valves

• AS 4623-2008 (R2016)

  AS/NZS 5601.1:2013 cites AS 4623-2008 (R2016) Jointing compounds and materials for use in gas pipe joints

• AS 4627-2005

  AS/NZS 5601.1:2013 cites AS 4627-2005 Quick-connect devices for gas

• AS 4629-2005

  AS/NZS 5601.1:2013 cites AS 4629-2005 (R2018) Automatic shut off valves and vent valves

• AS 4631-2005

  AS/NZS 5601.1:2013 cites AS 4631-2005 Limited flexibility connectors for gas

• AS 5200.053-2008

  AS/NZS 5601.1:2013 cites AS 5200.053-2008 Plumbing and drainage products - Part 053: Stainless steel pipes and tubes for pressure applications

• AS D26: 1972

  AS/NZS 5601.1:2013 cites AS D26-1972 (R2018) Tube fittings with dryseal American standard taper pipe and unified threads for automotive and industrial use

• AS ISO 6993.1-2007

  AS/NZS 5601.1:2013 cites AS ISO 6993.1-2007 (R2017) Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels - Part 1: Pipes for a maximum operating pressure of 1 bar (100 kPa) (ISO 6993-1:2006, MOD)

• AS ISO 6993.3-2007

  AS/NZS 5601.1:2013 cites AS ISO 6993.3-2007 (R2017) Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels - Part 3: Fittings and saddles for a maximum operating pressure of 1 bar (100 kPa)

• AS ISO 7.1-2008

  AS/NZS 5601.1:2013 cites AS ISO 7.1-2008 (R2017) Pipe threads where pressure-tight joints are made on the threads - Dimensions, tolerances and designation

Other

• ANSI LC 4-2012/CSA 6.32-2012 (R2016)

  AS/NZS 5601.1:2013 cites ANSI LC 4-2012 / CSA 6.32-2012 (R2016) - Press-connect metallic fittings for use in fuel gas distribution systems

• ANSI/ASME B1.20.1:1983

  AS/NZS 5601.1:2013 cites ANSI/ASME B1.20.1:1983 (R2006) Pipe threads general purpose (Inch)

• API SPEC 5L-2007 (44th Edition)

  AS/NZS 5601.1:2013 cites API SPEC 5L-2007 Specification for Line Pipe

• ASME B16.11:2011

  AS/NZS 5601.1:2013 cites ASME B16.11:2011 Forged Fittings, Socket-Welding And Threaded

• ASME B16.5:2009

  AS/NZS 5601.1:2013 cites ASME B16.5:2009 Pipe Flanges And Flanged Fittings: Nps 1/2 Through Nps 24 Metric/inch Standard

• ASME B16.9:2012

  AS/NZS 5601.1:2013 cites ASME B16.9:2012 Factory-Made Wrought Buttwelding Fittings

• ASME B36.19M:2004

  AS/NZS 5601.1:2013 cites ASME B36.19M:2004 (R2015) Stainless Steel Pipe

• ASTM A106/A106M - 08

  AS/NZS 5601.1:2013 cites ASTM A106/A106M - 08 Standard specification for seamless carbon steel pipe for hightemperature service

• ASTM A53/A53M-12

  AS/NZS 5601.1:2013 cites ASTM A53/A53M-12 Standard specification for pipe, steel, black and hot-dipped, zinc-coated, welded and seamless

• BS EN 10241:2000

  AS/NZS 5601.1:2013 cites BS EN 10241:2000 Steel threaded pipe fittings

• BS 1640-1:1962

  AS/NZS 5601.1:2013 cites BS 1640-1:1962 Specification for steel butt-welding pipe fittings for the petroleum industry - Part 1: Wrought carbon and ferritic alloy steel fittings

• BS 1640-3:1968

  AS/NZS 5601.1:2013 cites BS 1640-3:1968 Specification for steel butt-welding pipe fittings for the petroleum industry - Part 3: Wrought carbon and ferritic alloy steel fittings. Metric units

• BS 3799:1974

  AS/NZS 5601.1:2013 cites BS 3799:1974 Specification for steel pipe fittings, screwed and socket-welding for the petroleum industry

• BS 7838:1996

  AS/NZS 5601.1:2013 cites BS 7838:1996 Specification for corrugated stainless steel semi-rigid pipe and associated fittings for low-pressure gas pipework of up to DN 50

• BS 8537:2010

  AS/NZS 5601.1:2013 cites BS 8537:2010 Copper and copper alloys. Plumbing fittings. Specification for press ends of plumbing fittings for use with metallic tubes

• BS EN 14324:2004

  AS/NZS 5601.1:2013 cites BS EN 14324:2004 Brazing. Guidance on the application of brazed joints

• BS EN 1759-1:2004

  AS/NZS 5601.1:2013 cites BS EN 1759.1:2004 Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, class-designated. Steel flanges, NPS 1/2 to 24.

• ISO 49:1994

  AS/NZS 5601.1:2013 cites ISO 49:1994 Malleable cast iron fittings threaded to ISO 7-1

AS 5601-2004 Gas installations

Description

This Standard specifies requirements for consumer piping, flueing, ventilation and appliance installations which are associated with the use or intended use of fuel gases such as town gas, natural gas, liquefied petroleum gas in the vapour phase, tempered liquefied petroleum gas, simulated natural gas or any similar substance.

This Standard was also made available on CD-ROM by Standards Australia.

Notes/comments

This Standard was also made available on CD-ROM by Standards Australia.

View on Information Provider website

This Standard was also made available on CD-ROM by Standards Australia.

AS 5601-2004 Gas installations

This document is CITED BY:

• AS 3688-2005

  AS 5601-2004 is cited by AS 3688-2005 Water supply - Metallic fittings and end connectors

• AS/NZS 4020:2005

  AS 5601-2004 is cited by AS/NZS 4020:2005 Testing of products for use in contact with drinking water

AS 5601-2004 Gas installations

Description

This Standard specifies requirements for consumer piping, flueing, ventilation and appliance installations which are associated with the use or intended use of fuel gases such as town gas, natural gas, liquefied petroleum gas in the vapour phase, tempered liquefied petroleum gas, simulated natural gas or any similar substance.

This Standard was also made available on CD-ROM by Standards Australia.

View on Information Provider website

AS 5601-2004 Gas installations

Description

This Standard specifies requirements for consumer piping, flueing, ventilation and appliance installations which are associated with the use or intended use of fuel gases such as town gas, natural gas, liquefied petroleum gas in the vapour phase, tempered liquefied petroleum gas, simulated natural gas or any similar substance.

This Standard was also made available on CD-ROM by Standards Australia.

View on Information Provider website

AS 5601-2004 Gas installations

This resource does not CITE any other resources.